Precautions for installing bathroom faucets

1. If your bathroom faucet is used in a newly built house, because the water supply network is newly laid, there will definitely be impurities such as sand in the water. Before installation, pay attention to remove the debris in the pipe, and drain the water for a long time until the water quality becomes clear before installing the faucet.

2. When installing, the basin faucet should be kept away from hard objects as much as possible, and cement, glue and other materials should not be left on the surface to avoid damaging the gloss of the surface coating.

3. When opening and using, do not use excessive force to cause man-made damage, just turn it gently. Even for traditional faucets, you don't need to use a lot of force to tighten it. The faucet surface should be wiped clean after normal use. Do not use the faucet handle as a handrail for support or use.

4. When the water pressure is not less than 0.02mpa, after using it for a while, if you find that the water output is reduced, or even the water heater is turned off, cut off the hot and cold water flow, use a wrench to gently unscrew the water spout screen cover at the water outlet of the faucet, clean the impurities and then carefully install it, it can generally be restored to its original state.